Best heat gun in 2022 [Based on 50 expert reviews]

Bubble Buster Tool Mini Heat Gun - 300 Watt Heat Tool for Epoxy Resin, Tumbler Embossing for Removing Epoxy Cup Painting Resin Air Bubbles, Drying Crafts & Shrink Wrap Paint, Blue

C $12.99  in stock
2 new from C $12.99
Free shipping
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • 【Material】: This epoxy resin heat gun is made of high-quality ABS plastic and stainless steel, portable, durable and easy to use. It is lightweight and very easy to hold.
  • 【Features】: The air outlet of this resin heat gun is made of stainless steel, which is resistant to high temperatures and does not rust; The body use salient point nonskid design, which is non-slip and comfortable; The heat tool also with a transparent heat dissipation system, which makes heat dissipation fast and does not burn hands.
  • 【Widely Uses】: The portable embossing heat tool is well designed for epoxy cup painting resin to remove bubbles, which is perfect for your DIY craft. It is also great for embossing, drying paint, paper, fabrics, craft foams, glue, ink, DIY, firm shape, clay, candle making, jewelry making, soldering and so on.
  • 【Easy to Use】:The built-in stainless steel stand allows you to free your hands while drying the mug, just open the retractable stand and turn on the heat gun, the drying process will become so easy.
  • 【Warm Tips】:Heating temperature of this mini resin heat gun for crafts can reach 200°C. Do not blow directly at the object at 90 degrees with the heat gun. The distance between the muzzle of the hot air gun and the object is recommended to be 5-6cm. The time of single use should not be too long, usually 2-3 minutes.

SainSmart 1800W Heat Gun, with Visible Dual Temperature Setting 120 °F-1202 °F, Hot Air Gun for Crafts, Epoxy Resin, Shrinking tubes, Shaping PVC Tubing, Stripping Paint, and Shrink Wrapping

C $44.99  in stock
5 new from C $40.51
1 used from C $37.91
Free shipping
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • Powerful Heating and Cooling Modes: SainSmart 1800W heat gun is temperature variable, quickly heats up to 1112° F (600° C) or cools down to 140° F (60° C). Dual-mode setting: I: 140 - 752 °F (60° C - 400 °C), 300L / min; II: 140 - 1112 °F (60° C - 600 °C), 500L / min.
  • Visible Temperature Control Dial: With a temperature adjustment dial, the setting level is displayed by turning the dial, making the temperature setting more visible and accurate. Additionally, the dial design makes the heat gun much easier to control with gloved hands.
  • Scientific Ergonomic Design: With a scientific ergonomic design and a rubber covered handle, SainSmart heat gun is comfortable to hold. In addition, it has a stable self-standing design for hands-free use. The alone operation becomes a piece of cake.
  • Safe & High Quality: Using a high-quality heating wire, even if the temperature quickly changes from hot to cold, it will not break due to thermal expansion and contraction. Also, the mica paper helps heat insulation and noise reduction. On a side note, it's normal for a small amount of smoke to appear after the first use.
  • Multiple Nozzles: 4 different size and style nozzles help direct hot air where you want. They are great for heat shrink tubing, shaping PVC tubing, thawing frozen tubing, and wrapping vinyl.

DEWALT 20V MAX Cordless Heat Gun (DCE530B) (Tool Only)

C $154.20  in stock
7 new from C $129.00
Free shipping
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • Up to 990 degrees F/532 degrees C max output temperature
  • Up to 42 minutes of runtime per charge
  • 6.7CFM
  • Lock-on button for ease of use
  • Lock-off trigger to engage manual operation

Powerextra Heat Gun 1800W Kits Variable Temperature 122℉-1022℉(50℃- 550℃) High Power Hot Air Gun, 2 Speed-Setting, 4 Nozzle Attachments for Crafts, Stripping Paint, Shrinking PVC, PCB Repair

C $39.99  in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • [Variable temperature control]: 1800W hot air gun provides strong power to heat up to 1022℉(550℃) quickly. Temperature ranges from 120℉ to 1020℉ (50℃- 550℃). it has 2 modes: 50-400℃, 190L/min and 50-550℃, 450L/min, and it is really not that loud honestly.
  • [Overheat protection]: The heat gun will automatic power-off to protect the machine from being damaged when it is too hot. For long time use, Please set low temperature and high fan speed to cool down the heating element for minutes. 1. 5M UL certification power cord.
  • [4 nozzle attachments]: spoon reflector nozzle can be used for shrinking polyolefin shrink film; cone nozzle is for welding, shrink sleeking; Fish tail surface nozzle is for drying, Thawing; BBQ lighter is for lighting The coal and so on.
  • [Wide applications]: The heat gun can be used for stripping paint, lighting Charcoal, soldering pipes, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and molding plastics as well as drying and thawing.
  • [What you will get]: 1800W heat gun, user manual, card, 4 nozzle attachments, and 24 hours friendly customer service!

BLACK+DECKER Heat Gun, Dual Temperature (HG1300)

C $32.48
C $27.00
 in stock
13 new from C $27.00
1 used from C $21.53
Free shipping
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • Versatile use – 1,350 w heat gun is useful for a variety of applications, such as stripping paint, loosening rusted nuts, thawing pipes, and more
  • Dual temperature settings – switch between 750°f and 1,000°f temperature settings
  • Built-in stand – makes cooldown easier and safer
  • 3-position side handle – provides a comfortable grip and superb control for all applications
  • Lightweight and compact – simple to maneuver and reduces muscle fatigue

Mlife Mini Heat Gun - 300 Watt - Dual-Temperature Heat Tool for DIY Acrylic Resin Cups Tumblers Embossing Shrink Wrapping Paint Drying Crafts Electronics

C $15.99  in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • Styling Epoxy Glitter of Tumbler and clear air bubbles quickly with Mlife mini heat gun, make resin project more shiny and effortless.
  • Mlife heat gun is specially designed for DIY epoxy resin Tumblers cup painting to eliminate bubbles, which can make cup crafts more smoothly and beautiful.
  • Pencil-like heat gun design meet delicate need of resin projects. Retractable bracket for hands free operation for cup acrylic making. Handle part adopts salient point nonskid designs and fits comfortably in the user's hand.
  • UL-safety certified for North American use! Built with a heat sink, stabilize the internal temperature of the hot air gun and achieve a long-lasting performance.
  • Mlife Epoxy Glitter Tumblers Making Kits concentrate on helping achieve a easy DIY acrylic resin cup craft. Full refund or replacement is available if you are not satisfied with our Mini Heat Gun, Please be assured of the purchase.

Dual Temperature Heat Gun

C $29.99
C $24.99
 in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • Two gear temperature (550 ° / 1100 °)
  • Double electric heating wire rapid heating
  • High power turbofan, stronger air
  • Lightweight and compact design for ease of use and handling

Heat Gun, TGK 1800W Hot Air Gun Variable Temperature Settings 122℉~1202℉ with 4 Nozzle Attachments, Overload Protection Function for Crafts, Shrink Wrapping/Tubing, Paint Removing, Epoxy Resin (Black)

C $36.88  in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • 【More Convenient To Adjust the Temp with One Hand: 2 Fan Speed Modes & 6 Variable Temp Settings】1▶ Two Fan Speed Modes: I: 122℉-572℉, 250L/Min; II: 122℉-1202℉, 500L/Min, the I / II switch on its handle provides air flow control. 2▶ Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The red stepless temperature control roller provides rheostat-type heating, 6 gears in total, you can choose the gear you need, and it is more convenient to adjust the TEMP.
  • 【Overload Protection & Cool Down Mode】1▶ The overload protection will be activated if voltage or temperature is abnormal, the gun will stop heating in short time to avoid damaging your heat gun and circuit, and restart the heating when temperature returns normal. 2▶ Adjust the red roller to the far left (122℉) and set the switch gear to II to provide maximum airflow (500L/min). The Stainless Steel Nozzle temperature drops to 122℉ within 5-8 minutes. Safe to store and prolong service life
  • 【Auxiliary Handle & Scientific Ergonomic Design & Wide Applications】1▶ Industrial grade, home use: Light and compact design weighs only 1.34lbs. Ergonomic comfort grip with auxiliary handle can prevent repetitive strain injuries and other musculoskeletal disorders, provide greater comfort for long hours of use. 2▶ Multiple application scenarios - Ideal use for shrink wrapping/PVC, vinyl wrap, epoxy resin, heat shrink tube, lighting charcoal, candle making, electronics repair, remove paint, etc
  • 【4 Nozzles Accessories & UL certified】1▶ All the heat gun attachments made by high quality stainless steel. 4 Nozzles (used for controlling the flow of air and focusing heat to the desired area) extend the heat gun's utility, perform wide applications flexible. 2▶ The integrated stand can support the heat gun for hands-free working. 5.2ft UL certified long cable for your safety work around
  • 【What you Get】 1▶ TGK provide warranty for 1 year since the purchasing date. We provide FREE replacement service instead of repairing. However, we are not covering issues caused by on- purpose dropping from height, or any human damage. 2▶ Heat gun*1, Nozzle*4, Product manual*1, Warranty Card*1. 3▶ CAUTION -- When used for the first time, it will emit white smoke in a short time after starting up, which is a normal phenomenon. And the smoke should disappear in less than a minute

Mlife DIY Mini Heat Gun, Portable Hot Air Gun with 6.5FT Power Cord for Shrinking Wrapping PVC, Drying Paint Embossing, DIY Acrylic Resin Craft, Multifunctional Hand-hold Heat Tools, 120V/130W, Blue

C $16.99
C $14.99
 in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • Portable Mini Heat Gun: Mlife mini heat gun is much smaller than the usual heat gun (7.5” × 1.3 ”), much portable but still powerful, with high power heating up quickly. As a DIY lover, Mlife Mini Heat Gun can be a perfect helper to carry.
  • Multifunctional & Essential for DIY: Widely used for DIY projects such as burning powder, removing old painting, shrinking Wrapping film, making candle, epoxy resin, rubber stamp, defrosting and removing mud and dirt etc.
  • Long Cable and Extensive Handcrafting: With 6.56 ft (2 m) extended cable, longer more than any other mini heat guns is much easier for you to handle wider.
  • Easy to Use: Simply keep 2-3 inch away from your DIY craft at about a 45 degree angle and heat the craftwork, it can reach at about 200°C/390°F easily within a few seconds which can make the work more quicker and more efficient.
  • Warm Tips: Please don't use it more than 10 minutes in one time to avoid scald. If you're not happy with our product, please feel free to contact with us and we'll give you a full refund or a replacement within 24 hours.

ETEPON Mini Heat Gun Electric 300W Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-Hold Heat Tools Kit(Blue)

C $14.68  in stock
2 new from C $14.68
Free shipping
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • 【Temperature Control Device 】-The temperature control device is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with abnormal heat, the temperature control cuts off the current itself, which protects the safe operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire.
  • 【 Safer Design 】-With ABS material outside and stainless steel inside, this hot air gun is simple and more durable.Handing part is made of high quality ABS plastic with rhombus designs that cause safe hand-holding with small energizing.
  • 【 Heat Up Quickly 】-The temperature can't be adjusted but it heats up quickly . It can reach at about 200°C/390°F within a few seconds.
  • 【 Micro-circulation Cooling System】-Micro-circulation cooling system is adopted. When the air outlet temperature reaches 200 degrees, the temperature of the hot air handing parts does not exceed 28 degrees (approximately).
  • 【Perfect Tool for DIY Craft 】-Mini hot air gun is a perfect tool for DIY craft works. It can be used for embossing powder, heat-shrinkable film, clay, bump, rubber stamp, fast-drying paint, glue, catalytic adhesive bonding, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle.

Paint Heat Gun for Craft Epoxy Blower Hot Air Heater for Embossing Stamps PVC Resin 300 EVA Tubing Pen Shrink Tubing Heatcraft Heady Blow Wax Emboss Hotmelt Foam Wrap Tool for Phone Cellphone (Pink)

C $9.99  in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • ★【Embossing dryer】: Mini holder heat gun for equipment heating Shrinking film, mud toys and other items. good tool for ceramic creations.
  • ★【Shorter warm-up time】 : Made by High-tech PTC,The Glue Sticks instant heats up within 3-5 minutes.And easy to Remove Air Bubbles .110V voltage,New Arrival US Standard,no need voltage converter any more.
  • ★【Easy Hands Free Feature】: Use the installed, retractable stand for hands free operation to easily complete all of your heating for cup acrylic making.Convenient to use, no need for gloves and don't get your fingers sticky, no mess in applying epoxy and glues.
  • ★【High Quality Material】: Our Bubble Remover Gun is made from top quality materials of ABS plastic, copper, steel, precisely molded and processed by advanced CNC technology.Built in a heat sink makes the internal temperature of the Hot Air Gun is reduced and life is prolonged.
  • ★【WIDE USAGE】:It ensures steady blowing at a certain hot temperature to remove annoying bubbles in colorful or crystal clear pigments for epoxy resin mixing,lab, education demonstration, slime, clay, paint, craft, molding, casting, stain making,valentine's day gift making.

SEEKONE Mini Heat Gun, 350W 662℉ (350℃) Fast Heat Handheld Hot Air Gun Tool with Reflector Nozzle and 4.9Ft Long Cable Overload Protection for Craft Embossing, Shrink Wrapping and Stripping Paint

C $29.99  in stock
12 new from C $29.99
Free shipping
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • ★【HIGH POWER TOOL】: Electric mini heat gun with 3.0Amp motor can reach temperature 662℉ (350℃)and air flow 300L/min within seconds to make your work more efficiently. 4.9ft ultra long cable helps you do crafting in large area more conveniently.
  • ★【PREMIUM QUALITY & SAFE】: Built in over-heat protection, the current of this heat gun tool will be cut off automatically when temperature is overheated to avoid melting and fire. Made of high quality impact-resistant PA6+30GF body and with nozzle safety shield to ensure maximum security for you.
  • ★【ERGONOMIC DESIGN】: Pencil-like design and light weight make the hot air gun fit comfortably in your hand. And the mini heat gun is especially ideal for getting into hard-to-reach places and concentrating high heat on the tight area. Retractable bracket lets this heat shrink gun stand on the table stably and use it hands-free.
  • ★ 【VERSATILE APPLICATION】: Wide use and perfect for DIY projects. This mini heat gun can be used for shrink wrapping, soldering, paint removing, air bubble removing, candle making, electronics repairing, watercolor drying, defrosting and so on. If you like DIY, it is a great tool for you to make your own handmade work.
  • ★【WHAT YOU GET】:1 x 350W Heat Gun, 1 x Reflector Nozzle, 1 x User Manual, our worry-free and friendly customer service. Anything happened about the product, please feel free to contact our team at any time, we will be always here for you.

Heat Gun, 1600W Hot Air Gun Kit, Variable Temperature 122℉-1202℉(50℃- 650℃) Heat Gun for Heat Shrink, heatgun with 6 Nozzles Attachments for Crafts, Shrinking PVC, Stripping Paint, Remove Stickers

C $29.89  in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • 【2 Fan Speed ​​Modes and Variable Temperature Control】Our 1600W heat gun has two fan speed modes: I gear: 250L/Min; II gear: 500L/Min, the I/II switch on the handle provides airflow control. The red stepless temperature adjustment roller provides rheostat heating, the temperature range: I gear: 122°F-572°F; II gear: 122°F-1202°F.
  • 【Overload Protection】Our heat gun has an overload protector to avoid damage to your heat gun and circuit. So when the voltage or temperature is abnormal, the overload protection will be activated, the hot air gun will stop heating in a short time, and reheat after the temperature returns to normal.
  • 【Ergonomic Design and Wide Application】The handle with scientific ergonomic design is comfortable to hold and can be hung to dissipate heat when not in use. Suitable for a variety of scenarios: shrink wrap/PVC/heat shrink tubing, paint stripping, sticker removal, handicrafts, DIY production, etc.
  • 【5 Nozzle Fittings and Scrapers】5 nozzle fittings with different shapes, made of stainless steel, can concentrate or evenly disperse the heat flow and guide it to the work surface. After using the heat gun, please let it cool down before storing it to avoid burns.
  • 【Warm Tips】If you have any questions when purchasing, please feel free to contact us, we will reply within 24 hours.

SEEKONE Heat Gun 1800W 122℉~1202℉(50℃- 650℃)Fast Heating Heavy Duty Hot Air Gun Kit Variable Temperature Control Overload Protection with 4 Nozzles for Crafts, Shrinking PVC, Stripping Paint(5.2FT)

C $39.99  in stock
29 new from C $39.99
Free shipping
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in 1.5 seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min.
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit.
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.

Heat Gun, TGK 1800W Heavy Duty Hot Air Gun Kit 122℉~1202℉ Dual Temperature Settings with 6 Nozzle Attachments Overload Protection for Crafts, Shrink Wrapping/Tubing, Paint Removing, Epoxy Resin

C $36.88  in stock
Amazon.ca
as of November 30, 2022 8:00 pm

Features

  • 【2 Fan Speed Modes & Variable Temp Control】1▶ TGK 1800W heat gun provides two Fan Speed Modes: I: 122℉-572℉, 250L/Min; II: 122℉-1202℉, 500L/Min, the I / II switch on its handle provides air flow control. 2▶ Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The red stepless temperature control roller provides rheostat-type heating, it is more convenient to adjust the temperature with one hand
  • 【Overload Protection & Cool Down Mode】1▶ The overload protection will be activated if voltage or temperature is abnormal, the gun will stop heating in short time to avoid damaging your heat gun and circuit, and restart the heating when temperature returns normal. 2▶ Adjust the red roller to the far left (122℉) and set the switch gear to II to provide maximum airflow (500L/min). The Stainless Steel Nozzle temperature drops to 122℉ within 5-8 minutes. Safe to store and prolong service life
  • 【Auxiliary Handle & Scientific Ergonomic Design & Wide Applications】1▶ Industrial grade, home use: Light and compact design weighs only 1.44lbs. Ergonomic comfort grip with auxiliary handle can prevent repetitive strain injuries and other musculoskeletal disorders, provide greater comfort for long hours of use. 2▶ Multiple application scenarios - Ideal use for shrink wrapping/PVC, vinyl wrap, epoxy resin, heat shrink tube, lighting charcoal, candle making, electronics repair, remove paint, etc
  • 【5 Nozzles Accessories & Paint scraper & UL certified】1▶ All the heat gun attachments made by high quality stainless steel. 5 Nozzles (used for controlling the flow of air and focusing heat to the desired area) and paint scraper extend the heat gun's utility, perform wide applications flexible. 2▶ Built-in Japanese made motor, smooth air blow output with low noise. 3▶ The integrated stand can support the heat gun for hands-free working. 5.2ft UL certified long cable for your safety work around
  • 【What you Get】1▶ TGK provide warranty for 1 year since the purchasing date. We provide FREE replacement service instead of repairing. However, the warranty doesn't include issues caused by any human damage. 2▶ Heat gun*1, Nozzle*5, Paint scraper*1, Product manual*1, Warranty Card*1. 3▶ CAUTION-When used for the first time, it will emit white smoke in a short time after starting up, which is a normal phenomenon. And the smoke should disappear in less than a minute

Rocky Maldonado

"Hardcore coffee specialist. Unable to type with boxing gloves on. Devoted internetaholic."

Leave a Reply

Your email address will not be published. Required fields are marked *